Waterproof WAGO Gelbox
Moisture in junction boxes can quickly lead to short circuits. This risk can be reduced with the waterproof WAGO Gelbox.
The Gelbox is a compact box pre-filled with silicone-free gel. It provides IPX8 levels of moisture protection when combined with the WAGO 221-Series COMPACT Lever Connectors and 2273 Series COMPACT Push Wire connectors.
Compact design
Waterproof wago connectors are an ideal solution for LED lighting applications, where the wiring must be protected against moisture. They make it possible to connect several wires in a junction box using a tool-free lever-actuated secure connection system. The connectors also offer a compact design that saves space and makes the connections easier to access.
Increasingly compact LED lights and flat cable terminals require universal connection options that can be used without tools. The waterproof wago connector is the perfect solution, because it can be mounted on the back of the light and allows the cable to run through the housing. This means that the installation can be completed quickly and reliably.
The WAGO Gelbox is a small, compact box pre-filled with silicone-free gel and offers IPX8 levels of moisture protection for WAGO’s 221 Series COMPACT lever-nut connectors and 2273 Series PUSH WIRE connectors for conductor cross-sections up to 4 mm2. This level of protection far exceeds that offered by conventional potting compounds like polyurethane or silicone.
The WAGO Gelbox is easy to use: Just place the wired splicing connectors in the box and close it. The Gelbox is available in six sizes. Each has a layout that clearly specifies a fixed assignment based on the connectors that will be used. The combination of Gelbox and connectors must be replaced if the installation needs to be re-wired.
High degree of protection
A reliable connection is crucial for any electrical system. This is especially important in industrial settings, where the equipment must be safe and efficient. Wire connectors and splices offer an essential solution to these challenges. Their tool-free installation waterproof wago connectors and resistance to harsh environments have made them a popular choice for facilities electrical.
WAGO wire connectors are designed to withstand environmental factors, including moisture, temperature fluctuations, and vibration. This resistance increases the reliability of electrical systems and minimizes downtime. They can also be re-opened and rewired without damaging the wires, which makes maintenance tasks quick and easy.
They are also resistant to corrosion, a common problem in industrial applications. They help reduce the risk of loose connections, which can lead to fires and other damage. Additionally, their design protects against accidental touch, reducing the risk of electric shock.
Waterproof wago connectors are also available in a gelbox, which provides additional protection against moisture. This compact box is pre-filled with silicone-free gel and offers IPX8 levels of protection for WAGO’s 2273 series PUSH WIRE connectors and inline splicing connectors with levers. The gel is sealed inside the box to prevent contaminating the connections, preventing moisture from entering the junction box and potentially causing short circuits. This box is suitable for use in SELV (Safety Extra Low Voltage) applications and has been tested according to EN 60998-2:2008.
Easy to install
The waterproof wago connectors are a quick and easy solution for any electrical installation. Unlike traditional twist-on wiring nut connectors, they are tool-free and feature a lever-actuated secure connection. They waterproof connector manufacturer also come with a measuring tool on the back to ensure that you are using the correct amount of insulation. In addition, the connectors are pre-filled with silicone to prevent water from seeping into the wires and causing corrosion.
Moisture in junction boxes is a common problem, and it can cause dangerous short circuits. This can be caused by heavy rainfall or a strong water jet that’s too close to a junction box. The moisture can cause the current to take completely new paths, which quickly leads to a short circuit. This can be dangerous, especially for employees working in hazardous locations.
Fortunately, the WAGO Gelbox is an effective solution. The WAGO Gelbox is an IPX8-certified waterproofing system for lever nut wire connectors, which protects the splice points from moisture. The WAGO Gelbox can be used in a variety of low and extra-low voltage applications.
The WAGO Gelbox is available in nine different sizes. It can house multiple lever nut connectors, and the terminal diagram on each box clearly specifies a fixed assignment depending on what connectors are used. Once installed, the installer simply places the wired splicing connectors into the Gelbox and closes it with slight pressure. The Gelbox wraps itself entirely around the installation and provides protection.
Easy to re-wire
Waterproof wago connectors are easy to use and offer a high degree of protection. They are ideal for areas that are exposed to the elements, such as outdoor wiring. They also provide a great solution for wires that are exposed to moisture and corrosive agents. They eliminate the need for time-consuming measures such as tape, heat shrink, and mastics, and they are suitable for all voltage ranges.
Moisture can cause short circuits in electrical installations, which can result in expensive damage and downtime. This can happen due to condensation, heavy rain, or powerful water jets. The moisture can cause current to take completely new paths, which can be dangerous and lead to a fire. This is why it is important to have a reliable waterproof box for your electrical installations.
The WAGO Gelbox is a compact box pre-filled with silicone-free gel. It provides IPX8 levels of moisture protection for WAGO’s 221 and 2273 Series connectors. It is available in nine different sizes and can accommodate multiple connectors. Each size has a terminal diagram that specifies a fixed assignment depending on what connectors are used.
Whether you need to connect two or five conductors, the WAGO Gelbox is a convenient alternative to wire nuts. These connectors are available in both stranded and solid copper wire, and they can be used with any wire gauge. They have an opening on the back, which allows for continuity tests to be performed, and they come in milky white or clear housings. They are designed to protect against corrosion and can be easily re-wired if needed.