Waterproof Wago Connectors

Waterproof wago connectors provide consistent and verifiable electrical connections in junction boxes. They are quicker and easier to install than traditional twist-on wiring nut connectors. They also allow for less space in the junction box.

WAGO Gelbox is a prefilled, ready-to-use box that protects splicing connectors from moisture in junction boxes. It is available in various sizes and provides IPX8 levels of protection.

Easy to install

Moisture is an enemy of electrical systems, and even insignificant amounts can cause short circuits. This is why it is important to install wago connectors that protect against moisture. This is particularly the case for outdoor installations. WAGO offers an easy-to-install solution with its new Gelboxes. Meike Beimstroh, Product Portfolio Manager Installation Connectors, explains how it works in the video.

The box is pre-filled with a silicone-free gel and protects against moisture to an IPX8 level. This is a significant improvement over conventional potting compounds, which only provide protection to an IPX4 level. It is also a much quicker option, as it does not need to be mixed and then left to harden or dry.

In addition, the Gelbox is non-hazardous and can be used immediately after installation. It can also be re-accessed, which is something that cannot be done with conventional potting compounds. The gel used in the Gelbox is from Cellpack, a well-known manufacturer of potting compounds.

The WAGO Gelbox is a compact, easy-to-use box that is pre-filled with a silicon-free gel and provides an IPX8 level of protection for the 221 Series lever nut wire splicing connectors and 2273 Series push wire connectors. It is available in nine sizes. Each has a terminal diagram that specifies a fixed assignment, depending on the connectors that will be used.

Watertight

During installation, waterproof wago connectors form an extremely tight seal that prevents moisture from entering the electrical devices. Moisture is an important factor in electrical devices, because it causes corrosion and short circuits. It can also interfere with the performance waterproof wago connectors of electrical devices, especially when it comes to high-voltage applications. Fortunately, there are plenty of waterproof wago connectors available on the market. They come in a variety of sizes and types. Some are crimp-style, while others are solderable. All of them are designed to be used in harsh environments, and they are UL-listed and VDE-tested for safety.

Besides preventing short-circuits, waterproof wago connectors are also easy to install. They can be used in a wide range of applications, from small home renovations to large commercial projects. Moreover, they can be purchased in bulk at contractor size to save money. This makes them the ideal choice for electrical contractors.

The WAGO Gelbox is a compact box pre-filled with silicone-free gel that offers IPX8 levels of moisture protection for 221 Series lever-nut wire splicing connectors and 2273 Series push wire connectors for conductor cross-sections up to 4 mm2. It can be used in a variety of low- and extra-low voltage applications.

In addition to the IPX8 protection level, the Gelbox also provides a high degree of dust and humidity resistance. This ensures long-term reliability in harsh environments. It can also be reopened without losing the protective properties of the gel, which is an advantage over standard potting compounds.

Corrosion-resistant

Whether you’re installing electrical junction boxes or LED drivers for signs and luminaries, reliable wire connections are vital. WAGO’s lever nut connectors can help you create consistent and verifiable wiring splices in a wide variety of electrical installations. In addition to being easy to install and re-wire, these splicing connectors also save space. Unlike traditional splicing, they don’t require a dedicated box or encapsulation to protect the connections.

Before using the connectors, make sure the wires are properly stripped and free of any frays. Then, twist the connector onto the wires and push firmly. The silicone-filled twist-on cap keeps the connectors waterproof and prevents corrosion. Additionally, the insulated gripping surface helps to ensure that the wires are securely connected and can withstand vibration and other environmental stresses.

Waterproof wago connectors are perfect for a wide range of lighting applications, including LED lights, signs, and traffic signals. They can be used indoors or outdoors and are resistant to humidity, moisture, and dust. They can be installed without the need waterproof connector manufacturer for tape, heat shrink, or mastics and are compatible with most insulated conductors.

When choosing the best connection method, consider your installation environment and budget. Some methods, like splicing and soldering, require specialized tools and more time to complete. Other methods, like terminal blocks and Wago connectors, are easier to use and more cost-effective.

Easy to remove

Wago connectors allow you to make hidden connections that are maintenance free and replace junction boxes, terminal strips, or blocks (choc blocks). They are also easy to use. You can use them with either solid or stranded wires. You can easily install and remove them without using any tools. You can even reuse them in future projects.

This type of electrical connector is suitable for a wide range of installations. It can be used in a distribution box and is ideal for installation in building constructions. It is made of a special high-quality tin coating, which prevents corrosion and has an excellent contact quality. It can be used for both AC and DC connections and can be easily cleaned with a wipe cloth.

The new compact splicing connector is available for conductors with different cross-sections, and it can be easily installed in junction boxes. The splicing connector has a clear layout and is clearly labeled with easily legible marking. This allows you to quickly and clearly identify the correct connection. The WAGO Gelbox is also available for protecting the splicing connector against moisture.

The WAGO 222 series lever nut is ideal for connecting power and neutral conductors in LED lighting applications. It also offers the same safety features as traditional twisted-on wiring nut connectors and can be used in all types of junction boxes. It’s also rated for up to 32 amps and connects solid and stranded wires. It is important to follow safe removal procedures when removing a wire from the connector. If you are not careful, the conductors may be damaged.