Waterproof Splice Connectors

Waterproof splice connectors protect wiring from moisture and the elements. Ideal for irrigation valve splices, sprinkler wire repairs or any weather sensitive project.

CoolSplice connectors eliminate the need for tape, heat shrink, mastic and corrosion kits. A push button and Insulation Displacement Technology allow a common pair of pliers to terminate insulated wires into an industry proven reliable connection.

Sealing

Waterproof connectors are ideal for any job where the connection will be exposed to water. IP67 waterproof connectors seal against water and dust and are often used for industrial machinery, testing equipment, GPS systems, communications, security and surveillance equipment, and more.

Blazing Products’ SnapLoc wire connectors feature double O-ring seals that hydraulically pump and pack a full coating of pre-filled silicone around the splice. This waterproof coating completely encapsulates bare wires, sealing out moisture and corrosion for an easy one step installation that eliminates the need for tape, heat shrink or mastics. Perfect for sprinkler valve splices, repairs to trailers, and any weather sensitive wiring jobs.

CoolSplice waterproof splice connectors feature an industry proven reliable connection that’s visually confirmed through the clear sidewall. They work on both solid and stranded wire with an insulation displacement crimp contact, so no special tooling is required. They’re easy to terminate, too: a common pair of pliers is used to push the termination button. These wire splicers are also available in a gel-filled sealed version to extend the connector’s usefulness into harsh environments where environmental sealing is needed.

Durability

For applications requiring reliable, long-term connections, a durable wire splice connector is a necessary accessory. These splice connectors waterproof splice connectors feature moisture-resistant materials and sealants to protect the connector and the wires it connects. This durability allows you to use your wire splice connector in harsh environments without worrying about the connector failing or leaking.

When selecting a durable wire splice connector, make sure to select a model that is suitable for the application. You will need to consider the wire size and type, as well as the operating conditions for the environment where the splice connector is used.

You will also want to choose a durable splice connector that is easy to install and maintain. Most models require no special tools, allowing you to simply press the insulation displacement crimp contact to a bare wire and apply heat to seal the connection. For even more ease of use, some splice connector models offer gelfilled sealing to further extend the durability of the connector in harsh environments.

The ability to mate and unmate connections regularly and reliably is critical to the performance of an electronic system. For this reason, durable wire splice connectors must be able to withstand repeated mating and unmating cycles throughout their service life. Connectors are tested for this ability by subjecting them to a designated number of mating and unmating cycles as described on the product’s specification sheet.

Easy Installation

Waterproof splice connectors are an easy solution for making safe and strong electrical connections in hard-to-reach areas. They are available in a range of colors and material types. They are typically insulated with vinyl or nylon and have a solder sleeve that is pre-filled with silicone. This completely encapsulates the bare copper wires, sealing them against ground moisture.

Waterproof connectors are easy to install, and a simple tool is all that’s needed. They can be used for sprinkler valve splices, irrigation system splices, or any small wire splicing job. Just make sure the power is shut off before working with any electrical wiring, and use proper handling techniques to avoid injury.

Another option is to use a waterproof waterproof connector manufacturer hub for landscape lighting wires. A single hub can connect multiple fixtures in the same zone, and reduces cable usage, allows easier layouts, and prevents voltage drop. Just run a single home run to the hub, and then multiple cables can leave from there to each fixture in the zone.

CoolSplice connectors offer a similar solution with a push button termination for wires. No special tool is required, and they can be used to splice 22 AWG to 12 AWG (0.34 mm2 – 4.0 mm2) solid and stranded wires. They also come in a gel-filled version for harsh environment applications, and are approved for direct burial.

Warranty

Rain Bird stands behind the quality and reliability of our consumer products. If you are dissatisfied with your purchase for any reason, you may return it to the retailer where it was purchased within a reasonable timeframe. Rain Bird’s warranty does not cover damage due to misuse, negligence, or any other cause beyond the manufacturer’s control.

Waterproof wire connectors make it simple to change, lengthen or repair conductors without the hassle of cutting and stripping. Just insert the stripped ends of two stranded wires into both ends of a waterproof connector and apply pressure to the crimping tool for a secure, waterproof connection. This system is ideal for creating sensor connections or any other type of circuit requiring a durable and waterproof splice.

These waterproof connectors are easy to use and offer great insulating protection from the elements. They’re made with high-quality copper and tin coatings to provide superior electrical conductivity. They also feature thick crimps to ensure strong mechanical and corrosion resistance. The crimp butt splice terminal is available in several sizes to match your wire size, and the heat shrink ends are color-coded for easy identification.