Waterproof Low Voltage Wire Connectors
Protect your outdoor landscape lighting wire connections from moisture and the elements with waterproof connectors. Choose from a variety of wet location electrical connectors that are easy to install.
Whether you’re installing irrigation, low voltage lighting or speakers wires, shop reliable waterproof connectors from manufacturers like King Innovation and Blazing.
DryConn Waterproof Wire Nut Connectors
DryConn black and blue waterproof connectors are a larger, more secure option than standard wire nuts. UL 486D listed for wet and damp locations, they provide a tight seal that protects against condensation, water, water vapors and dust. These reusable waterproof connectors are easy to use and do not require pre-twisting. The cap is filled with silicone to protect the raw copper connection from ground moisture, making them a great choice for landscape lighting applications. Whether you are wiring one fixture, or several fixtures in a home run, these waterproof wire connectors are a simple solution that will ensure your electrical wiring inspection passes. Connector Size: 0.844 x 0.44 inches. Wire Range: Min #22-Max #12. Temperature Rating: 105 degrees Celsius. Choose from (2) pack, (12) pack, or (50) pack.
SnapLoc Waterproof Wire Connectors
When you need to splice in low voltage landscape lighting wires for irrigation or other outdoor systems, use a waterproof connector designed specifically for the job. These waterproof connections prevent moisture and oxidation from reaching your splices and allow you to keep your system running safely, efficiently and reliably.
The patented SnapLoc connector from King Innovation has become the industry standard for splicing in landscape lighting and irrigation. It’s easy to install and replace without the need for tools. It’s also durable and watertight, and it can handle up to 60 amps of current without leaking or corroding.
You can use this connection for all types of landscape lighting and irrigation wires, above ground and underground. Its pre-filled silicone fully encapsulates all bare wires, sealing them from moisture and corrosion. A double O-ring seal barricades water from creeping in, and latches lock the connector around the splice.
To install this connector, you must first remove the protective cap from each end and strip the strands of wires to the appropriate length. Then insert them into the clear housing on the back of the connector and squeeze it together until it snaps shut. It’s waterproof low voltage wire connectors easy to see if you have the wires in the correct position and the connection is secure. It’s also easy to open the connector again and make changes or repairs.
Lite The Nite Waterproof Wire Connectors
Waterproof electrical connectors are essential for landscape lighting and some irrigation equipment. Keeping wiring protected waterproof 3 way wire connector from moisture prevents corrosion, maintains efficiency and enhances safety. These waterproof wire connectors have an internal silicone grease that seals out water, steam and dust.
These connectors are ideal for low voltage landscape lighting, recirculating fountains and garden lights. They are also suitable for use with a wide range of other electrical applications such as powering LED strip lights, addressable LED light strips and RGB flexible LED strip lights.
These waterproof connectors are solderless and crimpless, making them easier to install than traditional electrical connectors. They are also safer and more durable, as there is no need to heat the connection with a flame or torch. Instead, you can simply apply a heat gun to melt the insulation, creating a strong and watertight bond.
To install these waterproof wire connectors, begin by turning off power to the transformer at the service panel. Next, strip the cable’s outer insulation to expose the conductors. Remove any dirt or debris from the copper wire ends and then combine each pair of conductors by twisting them together clockwise. Next, insert the twisted conductors into the waterproof connectors and tighten clockwise to ensure a sound electrical and mechanical connection. Finally, add the waterproof seal caps and test to ensure that the system is functioning correctly.
Bees Lighting
The Bees Lighting is a shop that deals with different lighting devices. It offers a wide array of choices to the consumers that vary in style and trend. It also has an assortment that is functional and suitable for different purposes. Its associates will assist you in retrieving the right product to suit your needs.
The company offers a competitive salary to its employees. Its average salary is $73,471 per year, or $35 per hour. This is less than Friendly Robots Co, which pays their employees $81,818 per year or $39 per hour. There are several skills that can help you get a higher salary at Bees Lighting, including business development, prospecting, and customer service.
The Lite the Nite landscape lighting transformer is an easy to install product. It features a composite black housing that is suitable for indoor or outdoor use. It will reduce 120 volts to 12 volts for your low voltage landscape lights. It is compatible with a variety of landscape lighting fixtures and has a built in LCD screen to make it simple to operate.